Blog

When you buy through links on our site, we may earn an affiliate commission.

2013 Scion FR-S 18x8.0

photo 1 Scion FR-S custom wheels   18x8.0, ET +30, tire size 225/35 R18. x ET 235/35 R photo 2 Scion FR-S custom wheels   18x8.0, ET +30, tire size 225/35 R18. x ET 235/35 R

Custom wheels & tires for Scion FR-S

Make Scion (646 cars)
Model FR-S (529 cars)
Year 2013 (499 cars)
Front rim size
(Rim Diameter in inches x Rim Width in inches)

18x8.0

Front rim offset
Definition

+30 mm

Add Wheels Spacers
Front tire size
P-metric stands for passenger vehicle. LT - for heavy loads, towing and off-road durability.

P 225/35 R18

Wheel backspacing
Correct backspacing allows enough room for the suspension, brake, and steering systems to operate without interference from the wheel. Positive offset creates more backspace, while negative offset reduces backspace

5.68”

Rear rim size
(Rim Diameter in inches x Rim Width in inches)

18x8.0

Rear rim offset

+30

Add Wheels Spacers
Rear tire size

P 235/35 R18

Source

I have conversion adapters 15mm to make them fit my 5 X 100.
so that would cancel it out to 15 offset.

I'm lowered 3 inches on BC Racing coilovers that have front adjustable camber plates. & I also have PBM rear lower control arms.

Front camber: -2.5 (Stock Wheel Setup)
Rear camber: -2.0 (Stock Wheel Setup)
I was wondering if I would have to add more camber to make these fit or possibly pull the fenders for more clearance? Also debating on raising the car 1" all around if it doesn't fit.
 

photo 3 Scion FR-S custom wheels   18x8.0, ET +30, tire size 225/35 R18. x ET 235/35 R photo 4 Scion FR-S custom wheels   18x8.0, ET +30, tire size 225/35 R18. x ET 235/35 R
Add your car build

Definitions

Wheel Offset

Refers to how your car’s or truck’s wheels and tires are mounted and sit in the wheel wells.

– Zero wheel offset is when the hub mounting surface is in line with the centerline of the wheel.
– Positive wheel offset is when the hub mounting surface is in front (more toward the street side) of the centerline of the wheel. Most wheels on front-wheel drive cars and newer rear-drive vehicles have positive offset.
– Negative offset is when the hub mounting surface is behind the wheel centerline. “Deep dish” wheels are typically a negative offset.

We've got 529 projects

Projects


2014 Scion FR-S 19x8.5 , 19x10.0

2015 Scion FR-S 17x7.5 +35

2004 Honda S2000 17x9.0 +45, 17x9.5 +38

2013 Ford Mustang 20x10.5 +30

2013 Audi S4 20x10.0

2007 Audi RS 4 19x9.5 +35

2014 Audi allroad 20x9.0 , 20x10.5

2014 Audi A7 20x9.0 , 22x10.5